Home > Tekno RC > Tekno Parts By Car >

Lunsford "Super Duty" Tekno EB410.2 3.5mm Titanium Turnbuckle Kit
Lunsford "Super Duty" Tekno EB410.2 3.5mm Titanium Turnbuckle Kit


 
Our Price: $37.95

Stock Status:Out of Stock

SKU: LNS36201
Qty:

DESCRIPTION
 
This is an optional Lunsford "Super Duty" Tekno EB410.2 Titanium Turnbuckle Kit, intended for use with the Tekno RC EB410.2 1/10 4WD Off-Road Electric Buggy Kit. Lunsford turnbuckles are CNC machined and thread rolled in house from domestic US 6AL/4V grade titanium. If you want to put your car on a diet, this is one of the best places to start eliminating weight, without sacrificing strength.

3.5mm SUPER DUTY Turnbuckles greatly increase the strength over the standard 3mm turnbuckles. Lunsford has spent years adapting this concepts to a variety of 1:10 products and have found this is needed for today's high bite, high speed carpet, AstroTurf and high traction clay surfaces.

Features:
  • Grade 5 Titanium is roughly a 45% weight savings over steel.
  • Anti-corrosion properties are greater than stainless steel.
  • Nano accurate thread rolling process
  • A very smooth, zero tolerance and bur free threading process aids in the preservation of the parts you are threading into.
  • Machined from Made in the USA center-less ground titanium.
  • From raw material to the finished product, all of our Grade 5 titanium born and bred in the USA.
  • Designed, developed and crafted in Albany, Oregon USA at the Lunsford compound.
Specifications:
Weight: 11.2g

Includes:
  • (4) 3.5mm x 45mm SUPER DUTY Titanium Turnbuckles (Front Camber & Steering)
  • (2) 3.5mm x 55mm SUPER DUTY Titanium Turnbuckles (Rear Camber)
  • (1) 1/8" Drill Bit.
Note: Rod End Resize: Increase the inner diameter your rod ends with the supplied 1/8" drill bit. A small cordless drill works best on a slow speed. Use a paper clip or similar item to first measure the depth of the threaded area of the rod end. Use that measurement to mark the drill bit or use a pinion gear to set the depth of the drill bit to ensure you do not drill beyond the existing depth of the rod end.

Fit's:

Tekno RC EB410.2

Share your knowledge of this product. Be the first to write a review »