Home > Associated Parts House > ASC Parts By Car > ASC B6.2D >

Hobbywing Quicrun 10BL60 Sensored ESC 6.5T Brushless G2 Motor Combo
Hobbywing Quicrun 10BL60 Sensored ESC 6.5T Brushless G2 Motor Combo


 
Our Price: $99.95

Stock Status:In Stock

SKU: HWI3830200BD
Qty:

DESCRIPTION
 
Perfect upgrade for 1/10 RTR On-Road Touring Cars

ESC Features:

  • High performance but low price, users can own this reliable race-ready ESC at an affordable cost.
  • Compact size, suitable for various car chassis.
  • Auto identification system can recognize sensored / sensorless brushless motors automatically.
  • Excellent operating feelings and plentiful adjustment options, suitable for most kinds of competitions.
  • 8 steps of timing adjustment greatly increase the output power of the motor, and unlock its maximum potential.
  • Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment.
  • 9 steps of acceleration (punch) adjustment, from "soft" to "very aggressive" to fit for different kinds of cars, tires and tracks.
  • Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection / Motor Lock-up protection.
  • One-button (the "SET" button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.

Specifications

  • Cont. / Peak Current / Resistance: 60A / 380A / 0.0008 Ohm
  • Motor Type Supported: Sensored / Sensorless Brushless Motor
  • Motor Limit:
    • 1. 1/10 On-road: 3656-size or smaller motor with the KV<6000
    • 2. 1/10 Off-road: 3656-size or smaller motor with the KV<4000
  • Battery: 4-8 cells NiMH, 2S Lipo
  • BEC Output: 6V@2A

Motor Features:

  • Built-in Hall sensor brings drivers an amazing sense of control.
  • Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings.
  • Dustproof design where motor leads exit.
  • Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections.
  • Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor.
  • Specifications:

  • Weight: 194g
  • No Load Current: 4.6A
  • Motor Dimension: Outer Diameter 36mm, Length 52.8mm
  • Shaft dimension: 3.17mm, Length of Projecting part 15mm

  • Share your knowledge of this product. Be the first to write a review »