Hobbywing XeRun XR10 PRO 160 Amp Sensord Brushless ESC Black Edition. Designed for top racing competition, the XR10 Pro is both reliable, intelligent and programmable, creating the ideal power solution for 1/10th scale racing. With the high current ratings of 160A (continuous) and up to 1200A (peak), this powerhouse is ready to push you to the front of the pack and is the ideal choice for all racing applications from touring cars to short course. Adjustable throttle and brake PWM frequencies, high current / high voltage BEC, easy programmability, and data logging are just some of its features.
Special Design for Top Racing
Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles) creates an ideal power solution to 1/10th scale top touring car, Pan car and buggy racing.
Programming / Upgrading / Data reading wirelesslyWith Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters,upgrade firmware and check relevant data of the ESC without leaving the control stand.
Adjustable Throttle & Brake PWM Frequencies
Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).
Efficient Heat Dissipating System
The aluminum casing and reticular heat sink combined with the HOBBYWING patented copper heat-conductive plates which are attached to the MOSFET board allows the internal heat to be quickly transferred to the heat sink for dissipation. With the high-performing detachable cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.
High current/voltage BEC
The built-in switch mode BEC with a maximum output of 8A and voltage adjustable between 6V and 7.4V allows the user to use various high voltage servos.
Separate Programming/Fan Port
The separate PRG/FAN port on the ESC can power an external fan for maximize cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.
Advanced and Secure Electronic Switch
The XR10 Pro ESC features an electronic switch with a lifespan of over 50000 on/off cycles,
housed in a completely waterproof, dust-proof and shock-resistant design.
Innovative data-logging Function
This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows the user to analyze the recorded data via a the LCD program box or WiFi module after each use
What's in the box?
- ID XR10 PRO ESC
- Motor Limit
- 2S LiPo/6S NiMH: (Touring Car) T≥3.5T, (Buggy) T≥4.5T.
- 3S LiPo/9S NiMH: (Touring Car) T≥6.5T, (Buggy) T≥8.5T.
- Type Scale: 1/10th
- Brushless Sensored ESC
- Cont./Peak Current 160A/1200A
- Power input 2-3S LiPo/4-9 Cell NiMH
- BEC output Swich Mode：6V/7.4V,4A
- Wire input Black-12AWG-200mm*2
- Wire output Black-12AWG-200mm*3
- Size 37.5x30.9x31.6mm (w/Fan & Fan Shroud)
- Weight 95g(w/ Wires)
- Cooling Fan
- Voltage Range 25.0x25.0x10.0mm
- 5V-7.4V (powered by BEC)
- XR10 PRO ESC w/ a cooling fan
- (2) Input wires 12AWG-200mm
- (3) Output wires 12AWG-200mm
- (1) back-up cooling fan
- dual capacitors
- Bonus parts: heat tubes, double tape, nylon cable zap traps
- User's manual